Blog

A gas boiler is an essential device for many households, providing hot water for showers, baths, and other uses. Knowing how to light a gas boiler is an important skill for any homeowner, and this guide will help you understand the process.

The first step is to make sure that the gas boiler is properly installed, and that the gas supply is connected. If the boiler is new, it should come with instructions on how to light it. If you're not sure, it's best to call a qualified gas engineer to help you.

Once you've ensured that the boiler is installed correctly, the next step is to turn off the gas supply. This is done by turning the knob on the gas supply valve to the "off" position.

The next step is to open the boiler's door, usually located at the top or side of the unit. Inside the boiler, you'll find a pilot light, which is a small flame used to ignite the gas.

To light the pilot light, you'll need a long match or lighter. Carefully light the match and hold it near the pilot light. The flame should ignite the gas and the pilot light should stay lit.

Once the pilot light is lit, you can turn the gas supply back on. This is done by turning the knob on the gas supply valve to the "on" position.

The next step is to turn on the boiler. This is done by pressing the "on" button on the boiler, which is usually located near the pilot light. The boiler should start up and the flame should stay lit.

If the boiler doesn't start up, or if the flame goes out, you should turn off the gas supply and call a qualified gas engineer.

Once the boiler is lit and running, you should check that the flame is burning correctly. The flame should be blue, not yellow or orange. If the flame is yellow or orange, this could indicate that the boiler is not burning correctly and could be dangerous. In this case, you should turn off the gas supply and call a qualified gas engineer.

Knowing how to light a gas boiler is an important skill for any homeowner. By following this guide, you can ensure that your boiler is lit safely and correctly. If you're ever unsure, it's best to call a qualified gas engineer for help.