Blog

Radiant floor heating is an energy-efficient way to heat your home, and a wood boiler can be used to provide the heat. To ensure that the system runs safely and efficiently, however, it is important to install a mixing valve. This valve will help regulate the temperature of the hot water, preventing it from becoming too hot and causing damage to the boiler or your home. In this article, we will discuss why you need a mixing valve, the different types available, and how to install one.

A mixing valve is a device that is installed between the wood boiler and the radiant floor heating system. Its purpose is to mix cold and hot water together to achieve the desired temperature. This helps to prevent the water from becoming too hot and potentially damaging the boiler or your home. It also helps to ensure that the water is the correct temperature and will not cause any discomfort to those using the radiant floor heating system.

When selecting a mixing valve for your wood boiler radiant floor heating system, there are a few things to consider. First, you will need to determine the size of the valve you need. This will depend on the size of your boiler and the size of the radiant floor heating system. You will also need to consider the type of valve you want. There are two main types of valves: manual and automatic.

Manual valves are the most common type of mixing valve. They are easy to install and require minimal maintenance. They are also relatively inexpensive. However, they do not provide the same level of accuracy as an automatic valve. An automatic valve, on the other hand, provides more accurate temperature control and is more expensive.

Once you have determined the size and type of valve you need, you can begin the installation process. The first step is to connect the valve to the boiler and the radiant floor heating system. This is usually done by attaching the valve to the boiler with a threaded fitting and then connecting it to the floor heating system with a flexible hose. Once the valve is in place, you will need to adjust the temperature setting on the valve to the desired level. This can usually be done by turning a knob on the valve.

Once the valve is in place and the temperature is set, you will need to test the system to make sure it is working correctly. You can do this by running a hot water test. This involves running hot water through the system and checking the temperature at the end of the run. If the temperature is not within the desired range, you may need to adjust the temperature setting on the valve.

Installing a wood boiler radiant floor heating mixing valve is an important part of ensuring that your system is safe and efficient. By following the steps outlined above, you can ensure that your system is properly set up and working correctly. If you have any questions or concerns, it is always best to consult with a professional to ensure that your system is properly installed and functioning correctly.